PC Cloning

PC Cloning Windows XP Proffesional SP2


The constructive solution internet cafe or the office was small-scale that was cheap.



Constructively a network of the computer needed the quite big cost, could be imagined built internet cafe or the office was small-scale with the number client 8 units, 1 computer unit at this time revolved US$320 x 9 units (1 server), meant to spend the cost around US$2880 only for computer no longer was increased other equipment and license Windows XP original.



Here will be explained how to built internet cafe or the office was small-scale that was cheap by means of clone cpu from 1 cpu became 2 clients or more with Windows XP Proffesional SP2 operating system and software the supporter. 1 CPU was made 2 clients meant to have saved approximately US$320, also saved license Windows because of 1 license Windows in share for 2 users.

See the example video cloning CPU was supervised (1 CPU became 2 clients):



The specification of the computer that must be prepared to client (2 clients):

- Proccessor Intel Pentium 4, minimum 1,7 Ghz (bigger is better) or by using AMD Proccessor.
- Motherboard, must support with the requirement hardware other
- RAM 512 MB (was recommended) or higher, carried out the trial with RAM 256 MB before if wanting to try for 2 clients, if the achievement of the computer was felt slow then used RAM 512 MB or more.
- Software for clone CPU, download here to buy or try trial version: BeTwin
- 2 monitors or 2 LCDs
- 1 keyboard PS2 and 1 mouse PS2
- 1 keyboard USB and 1 mouse USB
- 1 USB HUB v.2.0
- 1 souncard onboard and 1 USB soundcard
- 1 lancard onboard or external lancard
- 1 VGA onboard and 1 VGA AGP or 1 dual VGA AGP (VGA Port + DVI port) or dual PCI Express (VGA Port + DVI port), adapted with motherboard that was used, saw the picture of the VGA kind was supervised for more information. For DVI port could change with bought converter DVI to VGA.

STEP BY STEP

STEP 1:

Hardware and Windows XP installation:

- Put on all hardware that was mentioned above
- The Primary Boot Display fox to BIOS, made VGA AGP or PCI Express as primary boot display
- Install Windows XP (gave the name PC01, for example)
- Did setting IP address, 1 IP was used by 2 clients, for example IP address for CPU this as follows: 192.168.0.2 and IP for CPU server was: 192.168.0.1 (for example)
- Add user PC02 as administrator: Start - Settings - Control Panel - User Accounts - Create a new account

STEP 2:

Software BeTwin Installation:

This software that functioned as clone CPU, followed steps installation in link was supervised this:

Step by step BeTwin Installation